新闻动态
新闻动态 当前位置:首页>新闻动态>新闻动态

常用污水处理设备运维要点

网址:www.waterqz.com.cn  2020-12-21  作者:admin    阅读:

常用污水处理设备运维要点
Operation and maintenance points of common sewage treatment equipment
1)、粗、细格栅除污机
1) , coarse and fine screen cleaning machine
(a)、维护管理
(a) Maintenance management
a)定时清除格栅所截栅渣。加强汛期巡视,增加除污次数,保证水流畅通。
a) Remove the grid slag from the grid regularly. Strengthen the inspection in flood season, increase the frequency of decontamination, and ensure the smooth flow of water.
b)格栅除污机工作时,监视设备的运转情况,发现故障应立即停车检修。
b) When the grid cleaning machine is working, monitor the operation of the equipment, and stop the machine for maintenance immediately if any fault is found.
c)格栅前遇到大块杂物及漂浮物,及时清捞,以防损坏除污机部件。
c) In case of large debris and floating objects in front of the grid, timely remove them to prevent damage to the components of the trash remover.
d)每次除污机维护、检修工作完毕后及时清理格栅机内外卫生,保持干净。
d) Clean the inside and outside of the grid machine in time after the maintenance and repair of the trash remover, and keep it clean.
(b)、安全操作
(b) Safe operation
a) 除污机、螺旋输送机、压渣机保养、检修后,检查设备是否具备开机条件。
a) After the maintenance and repair of the trash remover, screw conveyor and slag press, check whether the equipment has startup conditions.
b) 除污机、螺旋输送机、压渣机被硬物卡住或垃圾缠绕时,必须停机后进行处理。
b) When the dirt remover, screw conveyor and slag pressing machine are stuck by hard objects or wrapped by garbage, they must be stopped for treatment.
c) 检修除污机或人工清捞栅渣时注意安全,并有有效的监护
c) Pay attention to safety and effective monitoring when repairing the trash remover or manually cleaning the grid slag

转让电话
13313028229